Soluble models for dynamics driven by a super-diffusive noise

We explicitly discuss scalar Langevin type of equations where the deterministic part is linear, but where the integrated noise source is a non-linear diffusion process exhibiting superdiffusive behavior. We calculate transient and stationary probabilities and study the possibility of noise induced transitions from a unimodal to a bimodal probability shape. Illustrations from finance and dynamical systems are given.     

A New Differential Method Applied to the Study of Arbitrary Cross Section Microstructured Optical Fibers

The present work adapts a recent grating theory called “Fast Fourier factorization” to cylindrical coordinates in order to study microstructured optical fibers (MOFs). Compared with the classical differential method, this new differential method takes into account the truncation of Fourier series and the discontinuities of the fields across the diffracting surface with the help of new factorization rules. The main advantage of this method is that the directrix of the diffracting cylindrical surface is arbitrary and permits anisotropic and inhomogeneous media although its numerical application needs longer computation time, compared with other well-known numerical methods. The S-propagation algorithm is used to avoid numerical contaminations. The numerical results are validated and compared with the well-established Multipole method in the case of a MOF with six circular cylinders. Further, a new cross-sectional profile (with sectorial inclusions) that the Multipole method cannot consider is studied.     

Bell's theorem based on a generalized EPR criterion of reality

First, the demonstration of Bell's theorem, i.e., of the nonlocal character of quantum theory, is spelled out using the EPR criterion of reality as premises and a gedankenexperiment involving two particles. Then, the EPR criterion is extended to include quantities predicted almostwith certainty, and Bell's theorem is demonstrated on these new premises. The same experiment is used but in conditions that become possible in real life, without the requirements of ideal efficiencies and zero background. Very high efficiencies and low background are needed, but these requirements may be met in the future.     

Accreditation of reference material producers: the example of IRMM's Reference Materials Unit

The potential approaches for third-party assessment of reference material producers are revisited and the activities of the Reference Materials (RM) Unit of the Institute for Reference Materials and Measurements (IRMM) to obtain accreditation to ISO Guide 34 and ISO 17025 are described. Accreditation was related to the Unit as all matrix RM activities of the institute are concentrated there. A management system was established that allows sufficient flexibility to be applicable to a wide range of RMs while being precise enough to ensure compliance with ISO Guides 30, 31 and especially 34 and 35. Accreditation was achieved in 2004 with independent scopes for testing and RM production and was confirmed and extended in 2005. The key aspects of the RM Unit's management system for RM production are presented. Presented at BERM-10, April 2006, Charleston, SC, USA     

Chiral separation of the four stereoisomers of a novel antianginal agent using a dual cyclodextrin system in capillary electrophoresis

Reported here is an analytical method enabling the stereochemical resolution of a new antianginal compound possessing two stereogenic centers, leading to four stereoisomers. Only one of these isomers is currently under development as a novel antianginal agent and consequently, the other three isomers are considered as unwanted chiral impurities. Therefore, an enantioselective method is required in order to check its enantiomeric purity. This paper presents a method exploiting the high efficiency of capillary electrophoresis and the complexing properties of cyclodextrins to achieve the separation of the four stereoisomers of this weakly basic compound (pKa = 7.4). For this purpose, the combination of a neutral cyclodextrin, hydroxypropyl-gamma-cyclodextrin (HP-gamma-CD), and an anionic cyclodextrin, carboxymethyl-beta-cyclodextrin (CM-beta-CD), was added to the separation buffer running in an uncoated silica capillary. After selection of the suitable cyclodextrin system, satisfactorily separation conditions were as follows: 30 mM phosphate buffer (pH 6.4) containing 10 mM of HP-gamma-CD and 10 mM of CM-beta-CD, running voltage +30 kV. The resulting run time and resolutions were respectively about 17 min and between 1.95 and 2.84. Linearity curves (0.993 < r2 < 0.998) are also shown.     

Effect of time on the interfacial and foaming properties of beta-lactoglobulin/acacia gum electrostatic complexes and coacervates at pH 4.2

The electrostatic complexation between beta-lactoglobulin and acacia gum was investigated at pH 4.2 and 25 degrees C. The binding isotherm revealed a spontaneous exothermic reaction, leading to a DeltaHobs = -2108 kJ mol(-1) and a saturation protein to polysaccharide weight mixing ratio of 2:1. Soluble electrostatic complexes formed in these conditions were characterized by a hydrodynamic diameter of 119 +/- 0.6 nm and a polydispersity index of 0.097. The effect of time on the interfacial and foaming properties of these soluble complexes was investigated at a concentration of 0.1 wt % at two different times after mixing (4 min, referred as t approximately 0 h and t = 24 h). At t approximately 0 h, the mixture is mainly made of aggregating soluble electrostatic complexes, whereas after 24 h these complexes have already insolubilize to form liquid coacervates. The surface elasticity, viscosity and phase angle obtained at low frequency (0.01 Hz) using oscillating bubble tensiometry revealed higher fluidity and less rigidity in the film formed at t approximately 0 h. This observation was confirmed by diminishing bubble experiments coupled with microscopy of the thin film. It was thicker, more homogeneous and contained more water at t approximately 0 h as compared to t = 24 h (thinner film, less water). This led to very different gas permeability's of Kt approximately 0 h = 0.021 cm s(-1) and Kt=24 h) = 0.449 cm s(-1), respectively. Aqueous foams produced with the beta-lactoglobulin/acacia gum electrostatic complexes or coacervates exhibited very different stability. The former (t approximately 0 h) had a stable volume, combining low drainage rate and mainly air bubble disproportionation as the destabilization mechanism. By contrast, using coacervates aged for 24 h, the foam was significantly less stable, combining fast liquid drainage and air bubble destabilization though fast gas diffusion followed by film rupture and bubble coalescence. The strong effect of time on the air/water interfacial properties of the beta-lactoglobulin/acacia gum electrostatic complexes can be understood by their reorganization at the interface to form a coacervate phase that is more fluid/viscous at t approximately 0 h vs rigid/elastic at t = 24 h.     

Synthesis,coordination to Rh(I), and hydroformylation catalysis of new beta-aminophosphines bearing a dangling nitrogen group: an unusual inversion of a Rh-coordinated P center

Variants of the beta-aminophosphine L(1) [Ph(2)PCH(2)CH(Ph)NHPh] containing additional nitrogen donor functions have been prepared. These functions are branched off the C atom adjacent to the P atom, or the P atom itself. Ligand [Ph(2)PCH(o-C(6)H(4)NMe(2))CH(Ph)NHPh] has been obtained as a mixture of two diastereomers L(3A) and L(3B) by lithiation of L(2) [Ph(2)PCH(2)(o-C(6)H(4)NMe(2))] with n-BuLi followed by PhCH=NPh addition and hydrolysis. The diastereomers have been separated by fractional crystallization from ethanol. Ligand Et(2)NCH(2)P(Ph)CH(2)CH(Ph)NHPh has been obtained as a mixture of two diastereomers L(5A) and L(5B)(starting with P-Ph reductive cleavage of L(1) by lithium and subsequent hydrolysis to give PhP(H)CH(2)CH(Ph)NHPh (mixture of two diastereomers L(4A) and L(4B)). The latter reacts with diethylamine and formaldehyde to afford the L(5) diastereomeric mixture. Complexes RhCl(CO)(L) (L = L(3A), 1(A); L(3B), 1(B); L(5A/B), 2(A/B)) were obtained by reaction of [RhCl(CO)(2)](2) and the appropriate ligand or ligand mixture. Complexes 1(A), 1(B), and 2(A) have been isolated in pure form and characterized by classical techniques and by single-crystal X-ray diffraction. All structures exhibit a bidentate kappa-P,kappa-N(NHPh) mode similar to the complex containing L(1). While complexes 1(A) or 1(B) are stable in CDCl(3) solution, complex 2(A) slowly converts to its diastereomer 2(B). This unexpected epimerization appears to take place by inversion at the Rh-coordinated P center, an apparently unprecedented phenomenon. A mechanism based on a reversible P-C bond oxidative addition is proposed. The influence of the pendant nitrogen function of the diaminophosphines L(3A) and L(5A/B) on the rhodium catalytic activity in styrene hydroformylation has been examined and compared to that of the aminophosphines L(1) or L(2). The observed trends are related to the basicity of the dangling amine function and to its proximity to the metal center.     

Rapid analysis of triterpenic acids by liquid chromatography using porous graphitic carbon and evaporative light scattering detection

An original system which uses Porous Graphitic Carbon as support and a mixture of organic solvents as mobile phase is proposed for the analysis of triterpenic acids by liquid chromatography. The separation of betulinic acid, ursolic acid, oleanolic acid, and 18alpha- and 18beta-glycyrrhetinic acids was carried out within a short time and monitored by evaporative light scattering detection as universal detection method. Molecular modelling studies show that the main contribution to the selectivity comes from the electrostatic interaction characterised by the dipole moment of the products.     

1-Methoxycarbonyl-substituiertes 2,3-Dihydropyridin-4(1H)-on (= Methyl-1,2,3,4-tetrahydro-4-oxopyridin-1-carboxylat) als Chromophor für die photochemische [2 + 2]-Cycloaddition

1-Methoxycarbonyl-Substituted 2,3-Dihydropyridin-4(1H)-one(= Methyl 1,2,3,4-Tetrahydro-4-oxopyridine-1-carboxylate) as Chromophore for Photochemical [2 + 2]-Cycloadditions With olefins having an electron-acceptor as well as with olefins having an electron-donor substituent, 1-methoxycarbonyl-substituted dihydropyridinone 12 undergoes [2 + 2] cycloaddition in good preparative yields. The photochemical cycloaddition is highly regioselective. For preparative purposes, the ring junction can be equilibrated to the thermodynamically more stable cis-junction. Only the ‘endo’/‘exo’ selectivity at the C-atom bearing the olefin substituent cannot be controlled. The photodimerization of 12 is the only side reaction. Using a slight excess of the olefin, the photodimerization can be suppressed. The protecting group at the N-atom of the dihydropyridinone can be varied in order to introduce an internal sensitizer, as shown with 1-acyl-substituted compound 29 , which underwent the cycloaddition process even with sunlight.